We Started Sinno Stone to Put the Right Stone in the Right Place

Most stone that disappoints a homeowner wasn’t bad stone. It was the wrong material for that spot. For thirteen years we’ve matched quartz, sintered stone and natural stone to how a room is actually used, then cut and fitted it ourselves in Shah Alam, so the surface still looks right in year fifteen.

Cut in Our Own Shah Alam Workshop

Authorised Partner: Caesarstone, Silestone & Dekton

97% On-Time Installation

12-Month Workmanship Warranty

5.0★ Google Rating

Beautiful Stone Fails When It’s Put Somewhere It Was Never Made For

Our founder, Anson Low, kept seeing the same thing across the Malaysian stone trade: surfaces that had gone wrong within a couple of years, and almost none of them because the stone itself was poor. Marble on a kitchen top in a house that cooks with asam and lime, etching within months. White quartz on a counter under a skylight, yellowing in the tropical sun. Wall-grade porcelain cut for a sink and showing a white ring at the edge, because it was never a countertop material to begin with.

Nobody had asked how the room would actually be used. So in 2013 he started Sinno Stone to work the other way round: understand the space first, then match the material to it. Quartz where the cooking is heavy and daily. Dekton where the sun hits directly, because it’s the UV-certified one. Granite or quartzite where the run sits beside a hob. Marble where it will be admired more than it’s scrubbed.

Getting that right takes more than a recommendation. It takes the workshop too, which is why we buy direct from the manufacturers, run our own bridge saw and CNC line in Shah Alam, and employ the crew that fits your kitchen. Matching the stone to the room means nothing if the edge profile, the sink margin or the fixing method is wrong. And it’s why we itemise a quote instead of handing over a lump sum: you can only weigh one material against another when you can see what each one actually costs.

Today Sinno Stone is an authorised partner for Caesarstone, Silestone and Dekton, and the maker of Zenstone, Moonstone and Moca Compact. The number we’re actually proud of, though, is 4,800 — the Malaysian homes still living well on surfaces we specified and cut ourselves.

Quartz, sintered stone, granite and marble samples compared side by side on a showroom table

Supply, Fabricate and Install, One Company Answerable for All Three

Eight applications, each with its own demands on the stone. We’ll tell you which materials
genuinely suit yours before we quote it. Full specifications live on Our Services.

Kitchen Countertops

The job that put us in 4,800 kitchens. Bridge saw and CNC cutting, with sink and hob cutouts done in our own workshop, in quartz, sintered stone, granite or quartzite.

Island Tops

A full slab top with mitred edges, so the veining runs unbroken over the corner and down the waterfall. Built for daily prep, and the piece everyone gathers around.

Vanity Tops

Cut and polished around your basin and cabinetry. Non-porous quartz and sintered stone shrug off years of splashes and Malaysian humidity without sealing.

Backsplash

The same slab as your countertop, carried up the wall behind the hob and sink. One continuous pattern, one wipe-down, and no grout lines collecting oil.

Wall Cladding

Bookmatched or linear-match panels for a feature wall, TV wall or bathroom, in sintered stone or granite, with the veining mirrored across the join.

Flooring

Large-format slabs cut to your dimensions, with linear-match patterning so the veining runs one way across an open-plan floor. Anti-slip finish available.

Cabinet Door Panels

Sintered stone fronts instead of laminate, veined to mirror your countertop. Edges are finished with a pencil round or 3mm chamfer, because a true bullnose isn’t possible on sintered stone.

Facade Panels

Exterior cladding in sintered stone, where paint in our climate means repainting every few years. For a panel in direct sun we specify Dekton, the UV-certified option. Quoted per project.

THE BRANDS WE CARRY

Caesarstone

GLOBAL – QUARTZ

Silestone

GLOBAL – QUARTZ

Dekton

GLOBAL – SINTERED

Zenstone

SINNO – QUARTZ

Moonstone

SINNO – QUARTZ

Moca Compact

SINNO – SINTERED

Three of those are partnerships and three are ours, and we think you should know which is which. Caesarstone, Silestone and Dekton are global brands we’re an authorised partner for, supplied with their original manufacturer warranty. Zenstone, Moonstone and Moca Compact are Sinno Stone’s own lines, sourced direct from the mills so you’re not paying a distributor’s margin on top. We also fabricate granite, marble and quartzite, quoted per slab.

Six Reasons Homeowners Stay With Us

The first one is the reason we exist. The other five are what it takes to deliver on it.

1

The Right Stone for the Right Place

We ask how the room gets used before we show you a slab, because that’s what decides whether a surface still looks right in year fifteen. If marble is wrong for how you cook, we’ll say so. If a cheaper stone does the job better, we’ll say that too.

2

We Own the Machines, Not Just the Showroom

A lot of stone suppliers are traders with a fabricator’s number saved in their phone. We employ the people who cut your slab and the people who fit it, so nobody can shrug and point at the next company along.

3

Genuine Slabs, Verified at Source

Every slab is what the label says it is, with the manufacturer’s documentation behind it. We never mix imitation stock into genuine inventory. Find an imitation slab in ours and we’ll give you 10 feet of granite countertop, free.

4

We Hold the Date We Give You

97% of the time, on the day we confirmed, with most kitchens finished in one. On the rare job that slips, you go to the front of the queue rather than the back of it.

5

An Itemised Price, Not a Lump Sum

Slab, fabrication and installation broken out, quoted before you commit. You can’t weigh one material against another honestly until you can see what each one actually costs.

6

Bought Direct, From Mills That Meet the Rules

We buy from the manufacturers rather than through a chain of middlemen, and we stay with quarries and mills that hold to environmental regulations. It keeps the price honest and the supply traceable.

Two Ways We Quote, Both Written Out in Full

Whichever way your job is priced, every dimension goes on the quote — each run, each return, each cutout. You’re paying for the stone you actually use, not a slab rounded up to the nearest whole number.

A Square-Foot Rate

Our popular house-brand stones — Zenstone and Moca Compact among them — carry a published per-square-foot rate covering supply and installation. Simple to compare, and we still write out every dimension underneath it so you can see how the total was reached.

A Line-by-Line Breakdown

For everything else, slab, fabrication and installation are listed separately. You can’t weigh one material against another until you can see what each part costs, and it’s the fastest way to spot when a quote elsewhere is hiding something.

Rates also differ by application — a countertop, a wall and a floor are costed by different methods, and quarried granite, marble and quartzite are quoted per slab rather than per square foot.

Tell Us How You’ll Use the Room

How you cook, how much sun the surface gets, how much upkeep you’re up for. That’s what decides the material, and we’d rather work it out with you now than replace a surface for you in three years.

The Part Most Stone Companies Don’t Own

Lot 2184 in Shah Alam is a working fabrication floor, not a showroom with a warehouse behind it. Come and watch your slab get cut if you want to.

Buying a slab is the easy part. What decides whether a surface lasts is everything after it: whether the template was measured to the millimetre, whether the sink cutout kept its margin from the edge, whether the mitred join lines up so the veining runs unbroken around the corner.

That work happens here, on our own bridge saw and CNC line, done by people we employ rather than a crew we hired for the week. It’s why we can promise a date and keep it, and why a mistake gets fixed by the person who made it instead of disappearing into a chain of subcontractors.

It’s also what lets us be honest at the recommendation stage. We know what a material does under the blade and on site — which stones chip at the edge, which need a full cement bond rather than dry-fix, which finishes show every scratch — because we handle them every day, not because a brochure said so.

Bridge saw & CNC line

Cutting, milling, edge profiling and cutouts, all under one roof in Shah Alam.

Sifu-led installation teams

More than seven teams, each led by a local Malaysian master installer. No Sifu on the job, no team sent.

Dust extraction on the line

Wet cutting and filtration, because the people who work here breathe this air.

Cutting

Polishing

Installing

Want the step-by-step from slab selection to installed? That’s on the homepage, and the project gallery
lives there too.

Where to Find Us

Sinno Sdn Bhd (202201037475)
Lot 2184, Jalan Baru Sungai Buloh, Seksyen U19
40160 Shah Alam, Selangor

The workshop and the showroom share one address, which we’d argue is the point. You can put your hand on a full slab, then walk over and watch one being cut. Open six days a week, no appointment needed.

We install across Kuala Lumpur and the Klang Valley as our main coverage area, and take outstation projects in Ipoh, Penang and Johor. For Singapore we supply and fabricate in MYR only — a Johor partner handles the Singapore-side measurement, customs, transport and installation, billed separately in SGD. Full coverage list on the homepage.

What’s Covered

Every installation carries two warranties: the manufacturer’s on the material, running 10 to 25 years depending on the brand, and our own 12-month workmanship warranty on the fit. Both start from the date of your paid invoice. If something’s wrong with our work, we come back and put it right.

Questions People Ask Before They Buy

We help you choose the right stone for what you’re building, then supply, fabricate and install it from our own workshop in Shah Alam — countertops, island tops, vanity tops, backsplashes, wall cladding, flooring, cabinet door panels and facade panels. One company carries the material advice, the measurement, the cutting and the installation warranty, rather than a supplier passing you along to a fabricator and an installer who each answer to nobody.

We start with the room, not the slab. How heavily you cook, how much direct sun the surface gets, whether it’s a wet or dry kitchen, whether the same material needs to carry onto a wall or floor, and how much upkeep you’re willing to do. Those answers rule most materials in or out before price enters the conversation. Quartz and sintered stone suit most Malaysian kitchens; Dekton is the one we specify for direct sun because it’s UV-certified; granite and quartzite handle heat well beside a hob; marble is better on a feature wall or vanity than under daily cooking.

Yes. Sinno Sdn Bhd, SSM registration 202201037475 (1483172-D), at Lot 2184, Jalan Baru Sungai Buloh, Seksyen U19, 40160 Shah Alam, Selangor. The workshop and the showroom are the same address, so what you see cutting is what goes into your home.

The cutting, yes. Bridge saw, CNC milling, edge profiling and sink and hob cutouts all happen in our Shah Alam workshop, by people we employ. Installation is done by one of more than seven teams we work with, each led by a local Sifu — a Chinese, Malay or Indian master installer — who is on site for your job. We don’t send a team unless a local Sifu is leading it. The measurement, the template and the 12-month workmanship warranty stay with Sinno, so if anything is wrong with the fit, you call us, not the installer.

Caesarstone, Silestone and Dekton are global brands we’re an authorised partner for, supplied with their original manufacturer warranty. Zenstone, Moonstone and Moca Compact are Sinno Stone’s own lines, sourced direct from the mills, so you aren’t paying a distributor’s margin on top. We’re clear about the difference because some suppliers aren’t.

No, neither. Compressed marble in particular is worth knowing about: it’s marble dust bound with resin, it’s soft, porous and acid-sensitive, and it’s regularly sold as quartz at quartz prices to buyers who can’t tell from a sample chip. If you want to test a slab, drip an acidic household cleaner on it. Genuine quartz doesn’t react; compressed marble bubbles.

Yes, all three, quoted per slab rather than at a published per-square-foot rate, because each slab differs in size, thickness and origin. Two things worth knowing: marble is porous and acid-sensitive, so lime, vinegar and asam will etch it and it needs sealing, which makes it a better fit for cladding, flooring and vanity tops than a heavy-use kitchen. And some suppliers sell granite as “quartzite” — we’ll show you the actual slab.

Yes, and a good share of our work comes that way. If you’re specifying for a client, talk to us early about lead times and slab availability, because that’s usually what puts a project schedule at risk rather than the fabrication itself.

Two: the manufacturer’s warranty on the material, 10 to 25 years depending on the brand, and our own 12-month workmanship warranty on the installation. Both run from the date of your paid invoice. Full terms are on the warranty page.

Come and See the Slabs

Send us your dimensions and we’ll quote properly, or drop by the Shah Alam showroom and put your hand on the stone before you decide.