Contact us
Tell Us What You’re Planning. We’ll Tell You What It Costs.
Send a few photos and rough dimensions and a named sales advisor will come back with a real price range, not a “call us to discuss”. Or come to Shah Alam and put your hand on the slab first. Both are free.
Ways to Reach Us
Pick Whichever Suits You
Every enquiry, whichever channel it comes in on, is handed to one sales advisor who stays with you from first message to final fit.
The fastest route. Send room photos and rough dimensions during operating hours and you’ll have a price range the same day. Message us on WhatsApp, or tap the WhatsApp icon in the corner of any page.
Best for: quick price checks, photos, follow-ups on an existing job.
contact@sinno.com.my. Attach floor plans, cabinet drawings or a PDF brief and we’ll reply from the same address so the thread stays in one place.
Best for: drawings, trade enquiries, anything with attachments.
Phone
014-346 2678. We’d rather you message first, so the advisor who picks up already has your photos and dimensions in front of them. But if you’d prefer to talk it through with a person, call.
Best for: questions that are easier to ask than to type.
Enquiry Form
Send Us the Job
Two minutes to fill in. A sales advisor replies with a price range, then we book a showroom visit or a site measurement, whichever you’d rather do first.
For a same-day price range, include:
- Photos of the space, even if it’s still bare concrete or the old countertop is in place. Send them on WhatsApp or email once you’ve submitted and we’ll attach them to your enquiry.
- Rough dimensions, in feet or millimetres. Length of each run and the depth is enough to start.
- Material or brand you’re leaning to, or tell us you’re not sure and we’ll suggest two.
- A budget range, so we quote materials that fit it instead of ones that don’t.
- Your location and timeline, especially if there’s a renovation handover date to hit.
What happens next
- One advisor replies. You get a name, not a queue, and that person stays on your job.
- You get a price range. Per square foot for quartz and sintered stone, per project for natural stone, with the extras itemised.
- Showroom or site measurement. Pick the actual slab in Shah Alam, then we template your space to the millimetre.
Showroom & Factory
Come and Stand in Front of the Slab
The showroom and the workshop share one address. You can compare full slabs, not sample chips, then walk over and watch one being cut on the bridge saw.
Sinno Sdn Bhd (202201037475)
Lot 2184, Jalan Baru Sungai Buloh, Seksyen U19
40160 Shah Alam, Selangor
| Monday to Saturday | 9am – 5pm |
|---|---|
| Lunch | 12pm – 1pm |
| Sunday | By appointment |
| Parking | Free, directly in front of the showroom |
Public holiday hours vary. Check the Google Maps listing for today’s opening time before you set off, or message us first.
Showroom inside the factory
One address for both. Walk in from the car park; no separate showroom to find.
400+ stones on display
Popular colours in quartz, sintered stone, porcelain and natural stone, as full slabs where we hold stock.
Colour samples for matching
Take a sample chip home to check against your cabinets, tiles and light. Just ask the advisor.
Watch a slab being cut
The bridge saw and CNC line run on weekdays. Ask and we’ll walk you through.
Where We Work
Kuala Lumpur & the Klang Valley, Plus Outstation
Kuala Lumpur
Petaling Jaya
Subang Jaya
Shah Alam
Puchong
Cheras
Ampang
Kajang
Ipoh (Outstation)
Penang (Outstation)
Johor (Outstation)
Kuala Lumpur and the Klang Valley are our main coverage area. Outstation projects in Ipoh, Penang and Johor are welcome, with transport itemised on the quote. For Singapore we supply and fabricate in MYR only; a Johor partner handles the Singapore-side measurement, customs, transport and installation, billed separately in SGD. Send us your location with the enquiry and we’ll confirm the schedule and any transport cost before you commit.
COMMON QUESTIONS
Before You Get in Touch
Because a cold call goes to whoever is free, and you end up repeating your kitchen dimensions to three people. When you message first, the enquiry is assigned to one sales advisor who reads it, replies with a price range and stays with you through the job. The number is on this page if you’d rather call; we just think you’ll get a better answer by messaging.
Yes. 016-390 6872 during operating hours, Monday to Saturday, 9am to 5pm. If it’s engaged, send the same question on WhatsApp and the advisor will call you back rather than leave you on hold.
Not on weekdays or Saturdays. Walk in any time between 9am and 5pm, bearing in mind the team breaks for lunch from 12pm to 1pm. Sundays are by appointment only, so message ahead and we’ll have someone there.
Yes, the showroom is inside the factory in Shah Alam, at the same address as the workshop. There’s free parking directly in front. It means you can see the slab you’re choosing and the machine that will cut it in the same visit.
Yes. We keep a selection of popular colours on display as full slabs, which matters because veining and colour vary from slab to slab even within one product. For special-order colours we work from samples and the brand catalogue, and you can view the actual slab once it arrives, before cutting.
Yes. Colour samples are prepared for exactly that, so you can hold them against your cabinet doors, floor tiles and wall paint in your own light. Ask the advisor in the showroom, or mention it in your enquiry and we’ll set them aside for you.
Whatever you have. A floor plan or cabinet drawing lets us price the job on the spot. Photos of the space help with colour. A cabinet door sample or floor tile, if you have one, makes matching far easier than guessing from memory. If you have none of these yet, come anyway and we’ll tell you what to measure.
The same channels, but tell us in the enquiry (there’s an optional Company field on the form) and a sales advisor who handles trade projects will pick it up. Send drawings by email and we’ll price the full package, including cladding, backsplash and cabinet fronts, against your handover date.
Yes, in Ipoh, Penang and Johor, with transport itemised on the quote. For Singapore we supply and fabricate only, in MYR; a Johor partner handles measurement, customs, transport and installation on the Singapore side. The full breakdown is on the Our Services page.
Still Working Out What You Want?
That’s fine. Send us what you have, even if it’s one photo and a guess at the length, and we’ll tell you what’s realistic in quartz, sintered stone or natural stone. Or read up on the services first and come back when you’re ready.
