Those black spots around your sink are not your stone failing. They are on the silicone, and that is fixable.
If you have spotted small black spots around your kitchen sink, your countertop is almost certainly fine. Quartz, sintered stone, and porcelain slabs are non-porous, so mould has nothing to feed on and nowhere to take root. What you are looking at is mould growing on the silicone sealant that runs along the joint between your stone and your sink, backsplash, or hob.
This comes up constantly with Malaysian homeowners, and for good reason. We live in 70 to 90% humidity year-round, we cook with a lot of steam, and many kitchens in flats and terrace houses have limited ventilation. Silicone in that environment rarely gets a chance to dry out fully.

Key Takeaways
- Mould does not grow on quartz, sintered stone, or porcelain slab surfaces, because these materials are non-porous and hold no organic matter for mould to feed on
- The black spots you see are on the silicone sealant, which is flexible, slightly porous, and traps water and food residue in microscopic gaps
- The four usual hotspots are the sink junction, the backsplash joint, the hob cutout, and the base of the tap
- Malaysia’s humidity and steam-heavy cooking mean silicone here stays damp far longer than in temperate climates, so drying matters more than cleaning
- Thirty seconds of wiping after each wash does more for prevention than any weekly deep clean
- Once mould has grown into the silicone rather than sitting on it, cleaning stops working and the bead needs replacing
- A mould-resistant silicone made for humid conditions buys you years, not months, over cheap general-purpose sealant
- If you would rather not maintain it at all, that is a fair choice — leave the bead alone and have the silicone cut out and reapplied every couple of years instead
Why Doesn’t Mould Grow on Stone Countertops?
Mould cannot grow on quality stone countertops because it needs three things at once — moisture, organic material to eat, and a warm temperature — and a non-porous stone surface only ever supplies the last one.
Engineered surfaces like quartz and sintered stone are manufactured to be effectively non-porous. Water does not soak in, food particles do not lodge below the surface, and nothing sits inside the material for mould spores to colonise. Wipe the surface dry and it stays dry. There is no hidden reservoir feeding growth from underneath.
What About Food Safety Certification?
Many premium quartz brands sold in Malaysia, including Caesarstone and Silestone, carry NSF-51 certification for direct food contact. That certification exists precisely because these surfaces resist bacterial and fungal growth well enough to prepare food on directly. If you bake or do heavy prep work on your countertop, it is worth understanding why NSF-51 certified quartz matters in a Malaysian kitchen.
The short version: the stone is doing its job. The problem is next to it, not on it.
So What Are Those Black Spots Actually Growing On?
The black spots are growing on the silicone sealant, the flexible bead that seals the joint between your countertop and everything it meets.
Silicone behaves nothing like stone. It is:
- Slightly porous, with microscopic gaps that trap moisture
- Constantly wet, sitting exactly where water splashes and pools
- A collector of organic debris — food particles, soap scum, cooking grease
- Awkward to clean properly, because its soft, slightly textured surface holds onto residue that a cloth glides over
Give that combination a warm, humid kitchen and mould will find it.
Where It Shows Up First
The sink junction. This is the most common spot by a wide margin. Water from washing dishes, rinsing vegetables, and cleaning pots collects along the seal where the countertop edge meets the sink, and stays damp through the day. You will typically see a dark line running along the silicone bead. Undermount sinks concentrate this more than top-mount ones, which is one of the practical trade-offs worth knowing when choosing between an undermount and a top-mount sink.
The backsplash joint. Where your countertop meets the wall tiles or slab, there is usually a silicone seal. Steam and oil splatter hit it during cooking, cleaning wets it again, and it often never dries fully. Expect scattered spots or a continuous dark line.
The hob cutout. Boil-overs and steam from a stockpot land here, and the area is hard to reach with a cloth once the hob is installed.
The tap base. Water pools around the base of the tap and sits there. It is the hardest area in the kitchen to dry properly and often the first place mould appears.

Why Is This Worse in Malaysian Kitchens?
It is worse here because our climate removes the drying window that kitchens in cooler countries get for free.
Humidity of 70 to 90% year-round. Ambient moisture stays high enough that silicone in a kitchen rarely dries out completely on its own. That hits hardest in flats and apartments with no cross-ventilation, kitchens without windows, and homes where someone cooks two or three times a day.
Steam-heavy cooking. Boiling rice, steaming fish, simmering curry, blanching noodles — Malaysian cooking generates serious moisture, and much of it condenses onto the coolest nearby surfaces, including the stone and the seals around it.
No seasonal break. Temperate climates get a cold, dry stretch each year that kills mould growth back. At a steady 25 to 35°C, we get no such reset. Growth continues all twelve months.
Wet kitchens make all three worse, since they take the heaviest washing and the hottest cooking in the house. If you are still planning your renovation, this is one more argument for choosing the right countertop material for a wet kitchen from the start.
How Do You Prevent Mould on Silicone Sealant?
You prevent it by removing the moisture, not by cleaning more often. Mould needs water sitting on the silicone for hours at a time. Take that away and nothing grows, regardless of how humid the room is.
Here is a maintenance routine that works in a Malaysian kitchen:
| Frequency | What to do | Time needed |
|---|---|---|
| After each wash-up | Wipe the sink and backsplash silicone dry with a cloth | 30 seconds |
| While cooking | Run the exhaust fan; open a window if you have one | No extra effort |
| Before bed | Final dry-down of all silicone joints with a dry microfibre cloth | 1 minute |
| Weekly | Scrub joints with dish soap and an old toothbrush, rinse, dry fully | 10 minutes |
| Weekly (after drying) | Spray a 1:3 white vinegar to water solution, leave a few minutes, wipe dry | 3 minutes |
| Monthly | Inspect for early discolouration and treat with bicarbonate of soda paste | 20 minutes |
| Yearly | Assess whether the bead has cracked, lifted, or stained beyond cleaning | 5 minutes |
The 30-second wipe is the one that matters most. Everything below it is a backstop for the days you forget.
For the stone surface itself rather than the joints, our guide to cleaning a quartz countertop the right way covers what to use and, more importantly, what to keep away from it.

How Do You Remove Mould That Is Already There?
For light surface mould, a bicarbonate of soda paste and a toothbrush will lift it out in one session.
- Mix bicarbonate of soda with a little water into a thick paste
- Apply it along the affected silicone
- Leave it 15 to 20 minutes
- Scrub along the joint with an old toothbrush, following the line of the bead
- Rinse with clean water
- Dry the joint completely — skipping this step undoes the whole exercise
For stubborn spots, a dedicated mould remover left on the silicone for the time stated on the label will usually do it. Products readily available here include Clorox Mould & Mildew Remover, Magiclean Mould Remover, and Exit Mould, stocked at Mr DIY, ACE Hardware, and most supermarkets. Cif Cream Cleaner handles lighter marks and is gentle enough for regular use on silicone.
Keep these off your stone. Whatever you use on the silicone, do not let bleach-based cleaners sit on a quartz surface. Prolonged contact can dull the finish or cause discolouration, and that damage does not clean off. Apply to the joint, not the slab, and rinse any overspill straight away.
If the mould returns within days of a thorough clean, it has grown into the silicone rather than sitting on top of it. No amount of scrubbing fixes that — the bead needs replacing.
When Should You Replace the Silicone Sealant?
Replace the silicone when the mould keeps coming back after cleaning, or when the seal itself has failed. Look for:
- Heavy black mould that resists repeated treatment
- Cracked, peeling, or lifting silicone that has lost adhesion
- Visible gaps between the countertop and the sink or backsplash
- A musty smell that persists after a proper clean
- Water appearing behind or beneath the seal
That last one is the urgent case. Water tracking behind a failed seal reaches your cabinet carcass, and swollen chipboard is a far more expensive problem than a mouldy bead.
What Does Replacement Involve?
- Cut out the old silicone with a removal tool or a sharp blade, taking care not to score the stone
- Clean the channel thoroughly with rubbing alcohol to remove residue and mould spores
- Let it dry completely — in Malaysian humidity, allow a full 24 hours, with a fan running if possible
- Apply the new silicone with a caulking gun in one continuous bead
- Smooth the bead immediately with a wet finger or a silicone tool
- Leave it to cure 24 to 48 hours before letting water near it
Plenty of homeowners manage this themselves. The two steps people get wrong are rushing the drying and applying the bead in sections rather than one pass. If you would rather not risk it, your countertop supplier or installer can handle it.
Which Silicone Should You Use?
Use a mould-resistant silicone rated for kitchen and bathroom use. Sealants with antimicrobial additives will not make mould impossible, but they slow it considerably, and a quality bead lasts 5 to 10 years against 2 to 3 for the cheapest general-purpose options. Dow Corning, Bostik, and Soudal all sell suitable products through Malaysian hardware stores.
At Sinno Stone, we supply Mildew Proof King, an acrylic-type sealant formulated to resist mould in humid conditions. It is what we recommend for countertop joints in Malaysian kitchens, and it is available directly through us.
One rule regardless of brand: never apply silicone to a damp surface. It will not bond properly, water gets trapped behind the bead, and you will be redoing the job within a year.

What If You Cannot Be Bothered to Clean It?
Then leave it. We would rather say that plainly than pretend every homeowner is going to wipe a joint dry twice a day.
While the bead is still intact and sealing properly, mould on the silicone is not harming your countertop, your cabinets, or your kitchen. What you are left with is a hygiene issue and a cosmetic one, and both are manageable without a weekly routine.
The hygiene part is the one worth respecting, because you prepare food right next to that joint. If you skip everything else in this article, keep this one habit: never wipe the joint and the countertop with the same cloth. Use a separate cloth for the silicone, or wipe the joint last and send that cloth straight to the wash. That single rule does most of the work.
The cosmetic part is simply that stained silicone looks bad. Once mould pigments have soaked into the bead, scrubbing will not bring the white back no matter how long you spend on it.
So the low-effort route looks like this: leave the joint alone, and every two years or so, or whenever you have had enough of looking at it, have the silicone cut out and reapplied. It is a quick job, it costs far less than most people assume, and you get a clean white joint again without having spent two years maintaining one. Get in touch with us when you want it resealed and we will redo it with Mildew Proof King, so the fresh bead holds out longer than the last one did.
Two caveats, and they are the only two. This applies while the bead is intact — if it has cracked, lifted, or water is getting behind it, you are no longer making a cosmetic decision, and the section above applies instead. And if someone in the house has asthma or bad allergies, do the weekly wipe rather than leaving it to sit.
Does Your Countertop Material Change Anything?
Not for the mould itself. Every material we install resists mould on the surface, so your prevention effort belongs on the silicone regardless of what you chose. What changes is how you clean the stone alongside it.
| Material | Mould risk on surface | What to know |
|---|---|---|
| Quartz | None — non-porous, no sealing needed | Avoid bleach and harsh chemicals, which dull the finish over time |
| Sintered stone | None — the most resistant of the group | Tolerates stronger cleaners, though you will rarely need them |
| Porcelain slab | None on the slab | Watch grout lines if the porcelain continues up the backsplash; grout is more porous than the slab |
| Granite | Very low when properly sealed | Keep the seal current; unsealed natural stone absorbs more moisture |
| Compressed marble | Low, but the material stains readily | Wipe spills quickly; this is the softest option of the group |
Sintered stone edges ahead of quartz on moisture and heat, which is one of several differences worth understanding before you buy — our quartz versus sintered stone comparison covers the rest.
One question we get often: should you seal quartz to protect it from moisture? No. Quartz has no pores for a sealer to enter, so an impregnator sits on top and does nothing useful. We explain what an impregnator actually does and when it is worth using in more detail.
What Do Homeowners Usually Get Wrong?
Five mistakes account for most of the mould problems we see:
Cleaning but not drying. The most common one by far. In 80% humidity, a clean-but-wet joint is just a freshly prepared surface for the next colony. Drying is not the optional final step, it is the point.
Waiting until it is obvious. Light discolouration lifts out with soap and a toothbrush in five minutes. Established black mould that has grown into the silicone needs the bead cut out and redone. Deal with it early.
Reaching for bleach first. Bleach works on mould, but it also degrades silicone over time and can damage your stone if it sits. Start with bicarbonate of soda or a purpose-made mould remover.
Scrubbing with steel wool or abrasive pads. These scratch both the silicone and the stone, and every scratch is a new place for moisture and residue to lodge. Use a toothbrush.
Applying new silicone onto a damp joint. Adhesion fails, moisture is sealed in, and the job fails within months. Wait the full 24 hours.
FAQ
Can mould actually grow on a quartz countertop? No. Quartz is non-porous, so mould has no moisture reservoir and no organic material inside the surface to feed on. Anything black you see on a quartz top is on the silicone joint, on residue sitting on the surface, or in the grout of an adjoining backsplash.
Is black mould around my kitchen sink dangerous? It is a hygiene problem rather than a health emergency. The mould that grows on silicone is not the cellulose-feeding kind people worry about, because silicone gives it nothing to feed on. The reason to take it seriously is that you prepare food right beside it, so keep a separate cloth for the joint and never use that same cloth on your countertop. A cracked or lifting bead is a different matter, since water getting behind it can reach your cabinet carcass.
Can I just ignore the mould and live with it? Yes, provided the bead is still intact and you keep the joint cloth separate from your countertop cloth. Mould on sealed silicone does not damage the stone or the cabinets underneath. Most homeowners who take this route have the silicone cut out and reapplied every two years or so, which resets the joint to clean white without any weekly upkeep in between.
How often should silicone sealant be replaced in a Malaysian kitchen? A quality mould-resistant silicone should last 5 to 10 years with regular drying and cleaning. Cheaper general-purpose sealant in a humid kitchen often needs replacing after 2 to 3 years. Inspect yours once a year for cracking, lifting, or staining that will not clean off.
Will vinegar damage my countertop? Diluted white vinegar on the silicone joint is fine. Do not leave neat vinegar sitting on a stone surface, particularly marble or compressed marble, where acid can etch the finish. Apply it to the joint, then wipe the area dry.
Conclusion
The reassuring part of this problem is how narrow it actually is. Your countertop is not failing, and there is nothing wrong with the material you paid for. Quartz, sintered stone, and porcelain slabs are doing exactly what they are built to do. What you have is a maintenance issue with a strip of silicone worth a few ringgit, in a climate that makes silicone work harder than it does almost anywhere else.
Thirty seconds of drying after each wash-up, a proper scrub once a week, and a mould-resistant sealant when the time comes to replace the bead will keep the joint clean for years.
If your silicone has already gone past the point where cleaning helps, or you are planning a new countertop and want the joints done properly from day one, talk to us about the material and the sealant together. Getting both right at installation saves the annoyance later.

