How Much Does a Quality Stone Countertop Cost in Malaysia? (A 2026 Price Guide)

Real 2026 supply and install prices per sqft for quartz and sintered stone countertops, and what moves the final quote.

A quality stone countertop in Malaysia costs between RM 110 and RM 689 per square foot in 2026, supplied and installed, depending on whether you choose quartz or sintered stone and which brand and collection you pick. A typical 35 sqft kitchen therefore lands anywhere from about RM 3,850 for entry-level quartz to over RM 24,000 for a top Caesarstone collection.

That is a wide range, and it is the reason so many homeowners in Kuala Lumpur, Selangor, Penang and Johor Bahru get three quotes that look nothing alike. You have picked the cabinet colour, settled the layout, and now the question that decides the budget is sitting in front of you: how much will the stone actually cost?

This guide answers it with real numbers from our 2026 price lists, not “from RM 99” bait. It walks through the five things that set the price, shows what each material tier costs per square foot, works the sums for a real island and a real kitchen, and tells you what a proper quotation should include so you can compare like with like.

Key Takeaways

  • Supply and install prices in 2026 run from RM 110/sqft (Zenstone quartz, Moca Compact sintered stone) to RM 689/sqft (top Caesarstone collections).
  • Material and brand choice is the single biggest cost driver. The other four are slab yield, installation access, edge and finish detailing, and cutouts.
  • A 35 sqft kitchen costs roughly RM 3,850 to RM 5,600 in entry-level quartz, RM 6,370 to RM 7,910 in Moonstone, and RM 8,680 to RM 16,415 in Dekton.
  • Price is quoted per square foot, but you pay for the slab you use, so a layout that wastes half a slab costs more than the sqft figure suggests.
  • A quotation without dimensions, material codes and a warranty line is not a quote you can compare.

What Are the Five Factors That Set Stone Countertop Cost in Malaysia?

Five things decide the final figure on your quotation: the material and brand, how efficiently your layout uses a slab, how hard the installation is, the edge and finish you choose, and how many cutouts the fabricator has to make. Material comes first and matters most, but the other four are where two quotes for the “same” kitchen drift apart.

1. Which material and brand you choose

This is the factor that moves the price the most, and the one you have the most control over. The table below is the full 2026 spread, supply and install, per square foot.

TierBrandMaterial2026 price (RM/sqft, supply and install)
Entry-level quartzZenstoneQuartz stoneRM 110 – RM 160
Mid-range quartzMoonstoneQuartz stoneRM 182 – RM 226
Premium quartzSilestone (Spain)Quartz stoneRM 282 – RM 634
Premium quartzCaesarstoneQuartz stoneRM 332 – RM 689
Value sintered stoneMoca CompactSintered stoneRM 110 – RM 150
Premium sintered stoneDekton (Spain)Sintered stoneRM 248 – RM 469

A few things worth knowing before you read too much into the tiers:

  • Zenstone and Moca Compact start at the same RM 110/sqft. Quartz is not automatically cheaper than sintered stone at the entry level. What separates them is how they behave in use, which is covered in Is Sintered Stone Better Than Quartz?
  • Within a brand, the collection decides the price. Caesarstone runs from RM 332 for Fresh Concrete to RM 689 for Calacatta Nuvo. Dekton runs from RM 248 for Group 0 colours like Moone and Danae to RM 469 for polished Group 4 colours like Awake. Picking the brand is only half the decision.
  • Moonstone sits in the gap. At RM 182 to RM 226 it gives you leather and polished finishes on a 3200 x 1600 slab without stepping up to Caesarstone or Silestone pricing.

If quartz is your likely choice, Quartz Stone Price in Malaysia (2026) breaks each brand down collection by collection.

2. How much of the slab your layout actually uses

Countertops are quoted per square foot, but stone is bought per slab. If your kitchen needs 1.3 slabs, you pay for two. That is the part most homeowners never see, and it is why an efficient layout matters more than haggling over the sqft rate.

Standard slab sizes in our 2026 range:

  • Zenstone quartz: 3000 x 1400 mm (15 mm) or 3200 x 1600 mm (20 mm)
  • Moonstone quartz: 3200 x 1600 mm
  • Caesarstone quartz: 3000 x 1400 mm or 3300 x 1600 mm, depending on colour
  • Silestone quartz: 3200 x 1500 mm
  • Moca Compact sintered stone: 3200 x 1600 mm, with some colours at 3200 x 1800 mm
  • Dekton sintered stone: mostly 3200 x 1400 mm, with a few colours at 3200 x 1800 mm

Take a 2600 x 900 mm island. On a 3200 x 1600 slab it leaves a 3200 x 700 strip down one side, which is often enough for a backsplash or a small vanity top. On a 3000 x 1400 slab the offcut shrinks to 3000 x 500, which is harder to reuse. Same island, same sqft, different amount of stone paid for.

Two ways to keep waste down:

  1. Ask your fabricator to lay out every piece on the slab before you confirm the colour. A good one does this as a matter of course.
  2. Use one colour for the whole kitchen. Splitting the wet kitchen and dry kitchen across two colours means two slabs with offcuts each, and why choosing different colours for each countertop is more expensive explains the arithmetic.

3. How hard the installation is

A ground-floor landed kitchen with a clear driveway is the baseline every quote assumes. Anything that makes the slab harder to get in adds labour, and labour is priced into the quote.

Things that make an install harder:

  • High-rise condos, especially where the slab does not fit the lift and has to go up the stairs
  • Large-format sintered stone at 3200 mm long, which needs more hands and more care on the way in
  • L-shaped or U-shaped runs with mitred corners that must be joined on site
  • Waterfall islands, where the vertical panel has to be mitred to the top so the veins run over the edge

Sinno fabricates in-house at our Shah Alam workshop, and installation is done by Sifu-led teams, with a local Malaysian Sifu leading every job on site. Measurement, templating and the 12-month workmanship warranty stay with us, so if an install needs an extra pair of hands or a stair carry, it is planned before the day, not discovered on it.

4. Which edge profile and finish you choose

Edge detailing is a smaller line than material, but it is not free. Here is where the two materials differ:

  • Quartz can take a range of profiles, from a simple pencil round to a mitred edge that makes a 20 mm top read as 40 mm or more.
  • Sintered stone is limited to a pencil round (about 2 mm eased) or a 3 mm chamfer. There is no true bullnose or ogee on sintered stone, and a sharp 1 mm edge will chip on light knocks. This is a material property, not a fabricator’s preference.

Finish also plays a part. Leather and honed finishes cost more than polished in most collections. Moonstone’s leather colours sit at RM 226 against RM 182 for Cotton Cloud polished, and Dekton’s polished Group 4 colours are priced above its matte Group 2 colours. If you are torn, the complete stone finish guide walks through how each finish looks and wears in a Malaysian kitchen.

5. How many cutouts you need

Every hole in the stone is a fabrication step. Give your fabricator the sink, hob and tap details before templating so the quote reflects the real work.

  • Undermount sink cutouts need a polished internal edge, which takes longer than a top-mount hole that gets covered by the rim.
  • Hob cutouts must match the appliance template exactly, whether gas or induction.
  • Extra holes for a filter tap, soap dispenser or pop-up socket each add a step.
  • Margins matter. A sink cutout should sit at least 50 mm from the backsplash and the front edge, especially with a wide top-mount sink. Tighter than that raises the crack risk on sintered stone.

Still deciding on the sink? Undermount vs top-mount for Malaysian homes covers the cost and cleaning trade-offs.


What Does a Stone Countertop Cost in Malaysia Per Square Foot in 2026?

Entry-level quartz and value sintered stone both start at RM 110/sqft supplied and installed, mid-range quartz sits between RM 182 and RM 226, premium quartz brands run from RM 282 to RM 689, and premium sintered stone spans RM 248 to RM 469. All prices below include the material, fabrication, delivery within Klang Valley and standard installation.

Material category2026 price range (RM/sqft)Best for
Entry-level quartz (Zenstone)RM 110 – RM 160First kitchens, rental units, tight budgets
Mid-range quartz (Moonstone)RM 182 – RM 226Most family kitchens wanting a leather or polished finish
Premium quartz (Silestone)RM 282 – RM 634Spanish-made quartz with a designer colour range
Premium quartz (Caesarstone)RM 332 – RM 689Concrete looks and bold Calacatta veining
Value sintered stone (Moca Compact)RM 110 – RM 150Sintered stone performance on an entry-level budget
Premium sintered stone (Dekton)RM 248 – RM 469High-heat kitchens, outdoor use, large formats

What does a 12 sqft kitchen island cost?

A 12 sqft island is a common size in Klang Valley condos and terrace houses. Using the ranges above:

Option12 sqft island cost
Zenstone quartz (RM 110 – RM 160)RM 1,320 – RM 1,920
Moonstone quartz (RM 182 – RM 226)RM 2,184 – RM 2,712
Moca Compact sintered stone (RM 110 – RM 150)RM 1,320 – RM 1,800
Dekton sintered stone (RM 248 – RM 469)RM 2,976 – RM 5,628
Caesarstone quartz (RM 332 – RM 689)RM 3,984 – RM 8,268

What does a full 35 sqft kitchen cost?

A 35 sqft kitchen covers a typical L-shaped run plus a short return, which is most Malaysian wet-and-dry kitchen layouts.

Option35 sqft kitchen cost
Zenstone quartz (RM 110 – RM 160)RM 3,850 – RM 5,600
Moca Compact sintered stone (RM 110 – RM 150)RM 3,850 – RM 5,250
Moonstone quartz (RM 182 – RM 226)RM 6,370 – RM 7,910
Dekton sintered stone (RM 248 – RM 469)RM 8,680 – RM 16,415
Silestone quartz (RM 282 – RM 634)RM 9,870 – RM 22,190
Caesarstone quartz (RM 332 – RM 689)RM 11,620 – RM 24,115

These are sqft-rate sums. Your actual quote will also reflect slab yield, so a 35 sqft kitchen that needs two slabs of a 3000 x 1400 colour will land higher than one cut cleanly from a single 3200 x 1600 slab.


Which Stone Gives the Best Value for a Malaysian Kitchen?

Mid-range quartz gives most families the best balance of price, durability and choice, Dekton gives the best performance for heavy wok cooking and outdoor kitchens, and Moca Compact gives the lowest entry into sintered stone. Which one is right depends on how you cook, not just how much you want to spend.

Best all-rounder: mid-range quartz

Moonstone at RM 182 to RM 226/sqft covers the ground most Malaysian kitchens need. Quartz is non-porous, so kicap and curry spills wipe off, and the 3200 x 1600 slab suits a long run without a joint. The one thing it asks of you is a trivet under the wok, because hot pans and quartz do not mix. If the budget is tighter, Zenstone gives the same material behaviour from RM 110/sqft.

Best performance: Dekton sintered stone

Dekton at RM 248 to RM 469/sqft is the material for a kitchen that sees a wok on high heat every night. It handles hot pans straight from the hob, is UV-stable for an outdoor wet kitchen, and comes in large formats that reduce joints. The trade-off is cost, brittle edges that need a pencil round or chamfer, and an install that needs an experienced team. What Is Dekton? covers the brand in detail.

Best budget sintered stone: Moca Compact

Moca Compact starts at RM 110/sqft and gives you sintered stone’s heat and scratch resistance with an extensive colour range on a 3200 x 1600 slab. You give up Dekton’s finish variety and its longer brand warranty, and the same edge limits apply. For a first home or a rental unit that will see hard use, it is a sensible middle path.

Malay master installer guiding a large-format sintered stone countertop slab onto kitchen cabinets in a Malaysian condominium

What Should a Proper Stone Countertop Quotation Include?

A proper quotation lists the material by brand and code, the dimensions of every piece, the cutouts, the edge profile, delivery and installation, and the warranty terms, so you can hold it against another quote line by line. If any of those are missing, the price is a guess dressed up as a number.

What should be included in the price

  • Site measurement and digital templating
  • Fabrication, including edge polishing
  • All cutouts you have specified (sink, hob, taps)
  • The stated edge profile
  • Delivery within Klang Valley
  • Sifu-led installation with a workmanship warranty
  • Final inspection and clean-up of the work area

None of this happens overnight. Templating, fabrication and installation each need their own slot, so build a realistic buffer into your renovation schedule. Stone countertop lead time in Malaysia breaks down where the days go.

What may be charged separately

  • Removing the old countertop or tiled top
  • Plumbing disconnection and reconnection
  • Cabinet reinforcement if the carcass cannot take the weight
  • Stair carry or crane hire where the lift will not take the slab
  • Extra cutouts added after templating
  • Outstation delivery to Ipoh, Penang or Johor

Small jobs also have a floor. A single vanity or pantry top below the supplier’s minimum order is charged at the minimum area, and why every supplier has a minimum order for stone countertops explains where that number comes from.

Two of our cluster guides go deeper on reading the paperwork: Stone Countertop Quote Decoded explains what every line item means, and How to Read a Countertop Quotation in Malaysia shows where hidden costs usually sit.


How Do You Get the Best Value on a Stone Countertop?

You get the best value by comparing quotes on the same scope, choosing the colour from a full slab rather than a sample, keeping the layout to one colour, and buying from a supplier who stands behind the install. Chasing the lowest sqft rate on its own is how people end up paying twice.

  1. Compare like for like. Two quotes only mean something if both list the same brand, code, dimensions, edge and cutouts. What questions should you ask before buying a countertop in Malaysia? gives you a checklist to send to every supplier.
  2. See the slab, not just the sample. Veined colours change across a slab, and a sample tile will not show you that.
  3. Decide who supplies the stone. A carpenter’s bundle is convenient, but a carpenter’s stone bundle and your own supplier are priced and warranted very differently.
  4. Think in years, not ringgit per sqft. Most Malaysian kitchens are redone once every 15 to 20 years. The RM 70/sqft gap between Zenstone and Moonstone is small against that horizon if the finish is the one you will still like in year ten.
  5. Ask what the warranty actually covers. Material defects come from the brand, workmanship comes from the fabricator. Both should be in writing.

Red flags in a countertop quote

  • A price well below the RM 110/sqft floor for any of the brands above
  • No brand or colour code, only “quartz” or “sintered stone”
  • A lump sum with no dimensions
  • No mention of warranty or who installs
  • Full payment demanded before templating

FAQ

How much does a quartz countertop cost per square foot in Malaysia? Quartz countertops cost RM 110 to RM 689 per square foot in Malaysia in 2026, supplied and installed. Zenstone starts at RM 110, Moonstone runs RM 182 to RM 226, Silestone RM 282 to RM 634, and Caesarstone RM 332 to RM 689, with the exact figure depending on the collection.

Is sintered stone more expensive than quartz in Malaysia? Not at the entry level. Moca Compact sintered stone and Zenstone quartz both start at RM 110/sqft. At the premium end, Dekton at RM 248 to RM 469/sqft sits below Caesarstone and Silestone’s top collections, which reach RM 689 and RM 634 respectively.

How much does a kitchen countertop cost for a whole kitchen in Malaysia? A typical 35 sqft Malaysian kitchen costs RM 3,850 to RM 5,600 in Zenstone quartz, RM 6,370 to RM 7,910 in Moonstone, RM 8,680 to RM 16,415 in Dekton, and RM 11,620 to RM 24,115 in Caesarstone, supplied and installed. Slab yield can push a quote above the sqft sum if your layout needs a second slab.

Does the price include installation? At Sinno, yes. Every price in this guide is a supply and install rate that covers templating, fabrication, delivery within Klang Valley and Sifu-led installation with a 12-month workmanship warranty. Always confirm this with any supplier, because some quote material only and add installation later.

Why do I get such different quotes for the same kitchen? Because quotes are rarely for the same thing. One may use a 15 mm Zenstone colour and another a 20 mm one, one may include the hob cutout and another may not, and one may have laid out your pieces to fit a single slab while another needs two. Ask each supplier to itemise, then compare.


Conclusion

A quality stone countertop in Malaysia costs between RM 110 and RM 689 per square foot in 2026, and where you land in that range is mostly your choice of material and collection, with slab yield, installation access, edge detailing and cutouts filling in the rest. Get those five things itemised on every quote and the numbers stop looking random.

If you are working out a budget for a specific kitchen, send us your layout and the colour you are leaning towards. We will lay the pieces out on the slab, price it by the sqft rates above, and tell you where it can be trimmed before you commit to anything. You can also see every slab in person at our Shah Alam showroom.